Napco User Codes

 To change user codes on your keypad, you will need to determine which keypad is your # 1 keypad. 
 

If you only have 1 keypad, that is # 1
 

If you have multiple keypads, test each keypad by holding down the 1, 2  and 3 buttons at the same time for 1 second.  The keypad will then read :  Keypad 0X (X being that keypad's number) out of system.   Repeat this  procedure until you find Keypad 01 out of system.  The keypads will  immediately return to normal.
 

The remainder of this procedure must be completed quickly.  If you pause  too long, the system will reset and you will need to restart the  procedure.  As always, it is a great idea to write down what you need to  do before beginning.
 

Enter your user code followed by the function button.
 

Press function slowly and repeatedly until the screen reads  "ACTIVATE PROGRAM"
 

Press the On/Off button
 

The first thing you should see is your #1 user code.  It will read: 01  XXXX where XXXX is the four number code for the person assigned to user  #1.
 

To change that code, simply press the function button until it is under the first number of the code.  Enter your new code:
 

Press the on/off button to save your entry.
 

Press the reset button to return to the main screen.
 

Example:
 

1234 Function >>> activate program  on/off  01 1234  function function 4321 on/off
 

Reset
 

If you need to change a different code, enter that user number in place of 01
 

Example:
 

04 5678   follow same procedure as above.
 

As always, feel free to call for assistance.